A-YZ(S) Slurry pump is the vertical cantilever centrifugal pump structure of single stage and single suction, the pump impeller is for semi-shrouded with the agitating vane on the vane
extended.

YZ Pump is the cantilever pump structure of single stage and single suction, with the bearing housing, supporting, intermediate pipe connecting the pump hydraulic components, the water is discharged out from the drain pipe parts, pump impeller is for semi-shrouded with the agitating vane on the vane extended, the main characteristic of this pump is the underwater pump shaft parts have enough rigidity, the impeller and pump shell have no bearings, no shaft seal, which can transport the greater medium of solid particles. The length of inserting the water by pump is between 800 and 2000, the suction pipe can be matched in case of need. The shaft seal runs into the underwater pump without setting up the shaft seal, drive should be installed the vertical motor on the supporting seat connecting with coupling and pump.

Specification

Type : YZ
Standard : -
Discharge Flange : DN 40 - DN 200
Capacity : 600 m³/h
Head : 30 m
Temperature of Pumped Liquid : +95 °C
Maximum Operating Pressure : 10 Bar
Frequency : Single/Three-phase 50 Hz - 60 Hz
Pump Speed : 300 ~ 3000 RPM
Viscosity : 0~2000 cps
Fluid : High Density Slurry
Impeller Type : Channel/Open
Casing : Ductile Iron
Wear Parts : Chromium Steel 
Impeller : Chromium Steel 
Shaft : SS420 / SS329
Seal : Mechanical Seal
Suction / Discharge Flange : -